logotype

Service containers

  • Compliant with DNV Standard for Certification No. 2.7-1 Offshore Containers (April 2006) and No. 2.7-2 Service Containers (December 1995).
  • Produced in high tensile carbon steel, coated with Norsok M-501 and/or ISO 12944 compliant system.
  • Standard design suitable for design temperature of -20ºC, lower temperature (-40ºC) as an option.
  • Forklift pockets and certified lifting lugs and lifting set.
  • Stackable up to two heights without requiring to detach the lifting slings.
  • Mechanical, architectural (A60 fire rated) and electrical installations (Zone 1 or Zone 2 classified area).
  • Combined pressurization fire & gas panel.
  • Custom designs for office rooms, laboratories, workshops, paintshops, storage and/or mud logging units.
  • Other dimensions and ratings upon request.
  • Optional design compliant with Norsok Z-015 upon request.

 

Description Dimensions (mm) Tare (kg) Payload (kg) MGW (kg)
20T L6058xW2438xH2850 4800 15200 20000
30T L9125xW2438xH2850 7000 18000 25000

Service Container

Chemical tanks

  • Compliant with DNV Standard for Certification No. 2.7-1, IMDG, ADR/RID, CSC, TIR, UIC.
  • Custom designs also compliant with ISO 1496 Part 3 and IMO Convention for Safe Containers (CSC).
  • Produced in high tensile carbon steel, coated with Norsok M-501 and/or ISO 12944 compliant system.
  • Tanks produced in AISI 316L (EN 1.4404) stainless steel, other materials as per requirements.
  • Custom designs with protective interior linings for storage of corrosive products.
  • Standard design suitable for design temperature of -20ºC, storage tank from -40ºC to +50ºC.
  • Fittings compliant with IMDG requirements as standard.
  • Forklift pockets (where allowable as per IMDG) and certified lifting lugs and lifting set.
  • Insulated and non insulated models (including heating systems).
  • Other dimensions and capacities upon request.

 

Description Dimensions (mm) Tare (kg) Payload (kg) Capacity (L)
500UK L2150xW1900xH2100 1700 TBA 2400
2000UK L2991xW2438xH2591 2700 TBA 9200
4000UK L6058xW2438xH2591 4000 TBA 20000

Chemical Tank

Drill cutting skips

  • Compliant with DNV Standard for Certification No. 2.7-1 Offshore Containers (April 2006).
  • Safe and efficient containment of drilling waste for transportation to onshore treatment site, vacuum rated.
  • Produced in high tensile carbon steel, coated with Norsok M-501 and/or ISO 12944 compliant system.
  • Standard design suitable for design temperature of -20ºC, lower temperature (-40ºC) as an option.
  • Compliant with Norsok S-002 requirements to improve health and safety.
  • Vacuum rated and/or suitable for gravitatory assisted feeding.
  • Oil resistant seal so as to prevent leaks and spillage during transportation.
  • Forklift pockets and certified lifting lugs and lifting set.
  • Stackable up to two heights without requiring to detach the lifting slings.
  • Other dimensions and capacities upon request.

 

Description Dimensions (mm) Tare (kg) Payload (kg) MGW (kg)
8.5T L2100xW1810xH1290 1250 7250 8500

Mud Skips

Lifting accessories

Overhead crane

  • Compliant with European and North Sea rules and regulations.
  • Design and analysis of lifting accessories, lifting yokes and spreader beams in compliance with Machinery Directive 2006/42/EC (EN 13155 harmonized standard).
  • Mechanical design of machinery in the marine environment: winches and shipboard/offshore cranes.
  • Mechanical design of miscellaneous appliances / gear: pipe handling machines, travelling blocks, etc.
  • Design and analysis in compliance with Lloyd's Register's code for Lifting Appliances in a Marine Environment and DNV Standard for Certification No. 2.22 – Lifting Appliances.
  • Coordination with Certifying Body during Design Review.

 

Lifting yoke

Cargo baskets

  • Compliant with DNV Standard for Certification No 2.7-1 Offshore Containers (April 2006).
  • High tensile carbon steel design, coating system compliant with Norsok M-501 and/or ISO 12944.
  • Standard design suitable for design temperature of -20ºC, lower temperature (-40ºC) as an option.
  • Forklift pockets and certified lifting lugs and lifting set.
  • Stackable up to two heights without requiring to detach the lifting slings.
  • Internal tie down points for secure cargo fastening and external tug points.
  • Drainage points and anti slip finish on floor surface.
  • Ready to be fitted with pipe or tool joint supports.
  • Custom designed for special cargo or load configurations, and stable lifting arrangements.
  • Other dimensions and ratings upon request.
  • Optional design compliant with DNV's Standard for Certification No 2.7-3 for extended ratings up to 50 tons.

 

Description Dimensions (mm) Tare (kg) Payload (kg) MGW (kg)
10F1 L3029xW1200xH1255 TBA TBA 15000
12F1 L3630xW1200xH1255 TBA TBA 15000
20F1 L6058xW1200xH1255 TBA TBA 15000

 Offshore rated cargo basket

More Articles...

  1. Offshore containers